Component and Assembly Drawings
| | Component Drawings | Assembly Drawings |
|---|
| General | - | 5000–5099 |
|---|
| Chassis | 1000–1999 | 5100–5199 |
|---|
| Power Train | 2000–2999 | 5200–5299 |
|---|
| Ancillary | 3000–3999 | 5300–5399 |
|---|
| Suspension | 4000–4999 | 5400–5499 |
|---|
How to Upload Your Drawings:
- Login using the ID provided to you via e-mail. The login button is located above the tabs at the top of the page.
- Locate an empty Drawing NO slot located in your subsystem section on this page. Empty slots are denoted by a red character following the hyperlinked Drawing NO like this Δ for example.
- Click on the link to the empty slot you wish to fill.
- “Browse” and locate the file you want to upload and confirm that it labelled the Drawing NO you chose and that it is in pdf format. For example a file should be named “3008.pdf” to be placed in the 3008 Drawing NO slot.
- Upload the file.
- E-mail Ryan Dark the Drawing NO you uploaded, a short description of the part in the drawing and your initials for identification.
- NOTE: Files can be uploaded over previously uploaded files if they are named the same. In this way you can update the versions of your drawings but you may also overwrite someone else’s drawing so be careful.
1000–4999 Component Drawings
1000–1999 Chassis
2000–2999 Power Train
3000–3999 Ancillary
| Drawing NO | Description | Part No | Drawn By |
|---|
| 3000 | Pillow Mounting Plate 3.25 X 7.5 X 1/4″ Al PL | | TGH |
| 3001 | Wilwood Dual Master Cylinder Pedal Asm | 340–5181 | TGH |
| 3002 | Wilwood Master Cylinder 3/4″ bore | 260–6764 | TGH |
| 3003 | McMaster Carr 1″ dia. Pillow Block | 9338T4 | TGH |
| 3004 | Pedal Mount Member - 3/4″ sq tube | | TGH |
| 3005 | Pedal Mount Cross Member - 3/4″ sq tube | | TGH |
| 3006 | Brake Position Bearing Shaft 1″ 4160 steel tube | | TGH |
| 3007 | Tri Pedal Cutter Brake Schematic | | TGH |
| 3008 | 5 PT SAFETY HARNESS AND BELT | 29063R | TGH |
| 3009 | SIMPSON ARM RESTRAINTS | 36000R | TGH |
| 3010 | SIMPSON NECK BRACE | 23022R | TGH |
| 3011 | AMB-IT Transponder | | TGH |
| 3012 | ‘07 Car Bottom Chassis Dimensions | | TGH |
| 3013 | Prototype Rear Fender | | TGH |
| 3014 | Prototype Rear Fender Mold | | TGH |
| 3015 | ‘07 Skid Plate | | TGH |
| 3016 | Flotation Mounting Anchor | | TGH |
| 3017 | ‘07 Foam Floating Mold | | TGH |
| 3018 | ‘08 Skid Plate | | TGH |
| 3019 Δ | | | |
| 3020 | Right Rear Forward Fender Bracket | | RAD |
| 3021 | Left Rear Forward Fender Bracket | | RAD |
| 3022 | Left Rear Back Fender Bracket | | RAD |
| 3023 | Right Rear Back Fender Bracket | | RAD |
| 3024 | Upright Fender Mounting Bracket | | RAD |
| 3025 | Directional Fender Top | | RAD |
| 3026 | Directional Fender Side | | RAD |
| 3027 Δ | | | |
| 3028 Δ | | | |
4000–4999 Suspension
5000–5499 Assembly Drawings
5000–5099 General
5100–5199 Chassis
5200–5299 Power Train
5300–5399 Ancillary
5400–5499 Suspension
Page last modified on March 10, 2008, at 01:41 PM
